6mm Special Narrow Rectangular Maillon Rapide (Ideal For Fixing Securing Dudek Harnesses to Reserve Y Bridle)
We have Introduced this Special Rectangular 6mm Maillon Rapide as it is fantastic for attaching the two harness reserve shoulder straps to the two ends of the reserve "Y" bridle onto the Harnesses of the Dudek Powerseat and other similar Harnesses with the small width Reserve Attachment Points by using two of these Maillions.
Use as single point, master connection between your parachute bridle loop (which generally comes with your parachute) and a Y-bridle (which normally comes with your harness, or is purchased as an accessory). Suitable for attaching single point reserves to bridles, mostly used for 18 22 mm flat webbing and Ideally used in conjunction with our Neoprene Maillon Covers and Elastic bands or heat shrink to stop movement and rotation once fitted.
The best strength/weight connector on the market, manufactured in France by Peguet.
Ideal for any application calling for reliable strength, smallest size and lightest weight.
NOTE: Steel maillons are stamped with a Working Load Limit (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers.
WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly as part of every pre-flight check. Tightening should be done with fingers. A spanner may be used carefully, just give them a nip. Threadlock compound or liquid is not recommended.
This maillon can be used for attaching the harness to the risers however we would recommend that you rather use suitable Carabiners for harness to riser attachments.
This maillon is not suitable for single point attachment between the harness and the reserve, or for any attachment for tandem paraglider or tandem reserve.
- Shape: Rectangular
- Material: Stainless Steel
- Diameter: 6.0mm
Full specifications can be found on the Peguet Maillon Rapide website.
NOTE: Steel maillons are stamped with a "Working Load Limit" (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers.
WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly as part of every pre-flight check. Tightening should be done with fingers. A spanner may be used carefully, just give them a 'nip'. DO NOT OVER-TIGHTEN as this will weaken the maillon! Threadlock compound or liquid is not recommended.
WLL: 450kg
BL: 2250kg
Total length: 55mm
Weight: 44g
Price: EACH
