SkyFlar Multi-Function DOUBLE HEAD LED + Li-Ion Battery Pack (2x White or 1x RED 1x White)
SKYFLAR 10-30 Volt Multi Function LED Strobe Light and NEW Li-Ion Battery Package
!!! NEW !!! RED & WHITE Combination DUAL HEAD Option
Fly safe !
Every year, there are more and more paragliders and other ultralight aircraft in the air . During the flight on the late hours of day the paragliders are difficult to see, that's why we should take care more for our safety and be visible for other members of air traffic. The answer for it is innovational paramotor strobe light SKYFLAR.
This UKPPG Listing Is For The NEW 2017
NEW Multi-Functional SKYFLAR with 2x Single Head, Self Contained 10-30 Volt
High Powered, LED Strobe Lights Complete With Multi-Functional Controller and Li-Ion Battery Pack inc 3x Batteries.
LED Colour Options: White Plus White LED or White Plus (NEW) Red LED
IDEAL FOR: PARAMOTOR / MICROLIGHT / HANG GLIDER / TRIKES
AND ALSO INCLUDES THE NEW Li-Ion Battery Pack
that's why we should take care more for our safety and be visible for other members of air traffic.
The answer for it is innovational paramotor strobe light SKYFLAR.
The LED lamp is composed of 5 led emitters with total power of 50W.
impact-resistance. The structure of the outer wall makes the LED lamp Scatter light.
LED flash is made from 5 Power LEDs of 50W total power.
These LEDs, thanks to their construction, emit huge luminous flux and effectively dissipate heat from the connector when the device is in use.
The LEDs are covered with resin, which ensures that the construction of the lamp is waterproof and highly resilient to shocks and impacts.
BASIC LED DATA:
- Power: 50 W flash.
- Luminous flux 6000 lumens.
- Color temperature 5500-6000 K.
- Does not interfere with radio waves.
- Integrated temperature sensor.
- Resilient to shocks, impacts, water.
- LED cooperates with the ST-202 controller.
- Small size: Diameter 34 mm.
- LED weight: 70g.
- Range of about 8 km in the dark !!!
BASIC ST-202 CONTROLLER DATA:
- Supply voltage: 10v – 30v DC.
- Aluminum housing resilient to shocks, impacts, water.
- Protection: thermal, short-circuit, current, against reverse polarity, against battery damage, against automatic shutdown.
- Option of automatic activation after connecting the power supply (possibility of putting the controller in a hard-to-reach place).
- Possibility of assembling the switch out of the controller (a ST-201 switch extension kit is available).
- lluminated LED button on the switch that signalizes working functions and messages (such as low battery, not connected lamp etc.).
- Possibility of modifying the settings and disabling some working functions by connecting to a computer.
- Measurements: 145mmx25mm (5.70 x 0.98 inch.).
- Weight: 120g.
6 WORKING FUNCTIONS:
- Single flashes with a frequency of 43,50,55 flashes per minute.
- Single flashes with a frequency of 43,50,55 flashes per minute + steady light (position lamp).
- Double flashes with a frequency of 43 cycles per minute.
- Triple flashes with a frequency of 43 cycles per minute.
- 360 degrees flashlight (additional lighting of the start and landing, and assembling or disassembling of the equipment).
- SOS light signal activated by an integrated overload sensor or manually.
THE SET INCLUDES:
1. 50W 6000lm LED lamp with a connector.
2. Assembly set for the LED lamp for a 20 mm pipe.
3. ST-201 controller.
4. Assembly set for the ST-201 controller for a 20-30 mm pipe.
5. ST-201 connecting cable with protection tapes.
6. Power supply cable.
7. USB cable.
8. Cable tie 10 pcs.
9. Operating manual.
THE SET ALSO INCLUDES:1x Li-Ion Power Pack Kit 12.6 Volt
3x LG INR18650 MH1 3.2AH Batteries (This Kit Contains Batteries, The Battery Frame, Outer Case & Charger)
BATTERY PACK BASIC DATA:
- Output voltage: 12.6V.
- Short circuit protection.
- Overload protection.
- Over-discharge protection.
- Current protection.
- Maximum continuous discharge current: 5-8 A.
- Maximum momentary discharge current: 10 A.
- Work temperature: - 40°C ---- + 50°C.
- Weight with storage batteries: 260 g.
- Measurements ( length/width/height ): 11,5cm/8cm/3.5cm.
1. A three-battery protective frame.
2. A case for the protective frame.
3. A Velcro to mount the case.
4. A Li-ion charger 12.6V 1A with a LED. **
5. 3 x LG INR18650 MH1 3,2Ah.
6. Operating manual.
Supported LI-ION 18650 Cells:
SANYO NCR18650GA 3450mAh , LG INR18650 MH1 3200mah ,PANASONIC NCR18650PF 2900mAh, SONY US18650V3 2250mAh , SAMSUNG ICR 18650 22P 2150mah.
** (We request that you to provide information about the plug: EU, US, UK; otherwise we will send it according to the country of order) **
Attention:When buying please choose the length of wire for the led lamp (to install the hermetic connection).
If we do not get the information, we will send the lamp with wire of 120 cm length as standard, with the waterproof connector
which needs to be installed by yourself.
The max length of wire is 120 cm (47.24 inch).
PRODUCT PROTECTED BY PATENT LAWAttention:
The Supplied Strobe Mounting Bracket is designed for 20mm circular Tubing, If your Paramotor has an Aerofoil shape cage section or a larger or Smaller Cage Tube size then you may need to make your own bracket or modify the supplied one to fit your frame.
Product awarded by Science and Technology Park in Poland for innovation .
It is a proffesional strobe light dedicated to any type of Paramotors. It is the smallest paramotor lamp on the market with the highest flash and visibility up to 5 miles at dusk! Handmade with the highest level of accuracy, waterproof and shock resistant.
The lamp was tested by paragliders and improved for 3 years, and become more and more popular for its power, ease of use and small dimensions. Product awarded by Sience and Technology Park in Poland for innovation. We provide a cooperation on the highest level.
- Multi Function LED Strobe Light x2
- Li-Ion Battery Pack
Write an online review and share your thoughts with other shoppers!