Home > Brand Shop > SkyFlar LED Strobe Light Systems

SKYFLAR Li-Ion Battery Power Pack Kit 12.6V For Paramotor PPG LED Strobe - Inc Batteries

SKYFLAR Li-Ion Battery Power Pack Kit 12.6V F

SKYFLAR Li-Ion Battery Power Pack Kit 12.6V For Paramotor PPG LED Strobe - Inc Batteries

£POA

CURRENTLY OUT OF STOCK

Fly safe !

Every year ,there are more and more paragliders and other ultralight aircraft in the air . During the flight on the late hours of day the paragliders are difficult to see, that's why we should take care more for our safety and be visible for other members of air traffic. The answer for it is innovational paramotor strobe light SKYFLAR.

LI-ION POWER PACK KIT INCLUDING 3x BATTERIES
1x Li-Ion Power Pack Kit 12.6 Volt
3x LG INR18650 MH1 3.2AH Batteries
(This Kit Contains Batteries, The Battery Frame, Outer Case & Charger)

For Use With Single or Duel or Triple Head, 12 Volt, Self Contained,
SKYFLAR High Powered LED Strobe Light or NEW Multi-Function LED Strobe Light System (LED Strobe Lights Available in our Other Listings)

LI-ION POWER PACK KIT SKYFLAR LG MH1 3.2Ah.
!!! Fly Safer !!!

Every year, there are more and more paragliders and other ultralight aircraft in the air.
During the flight on the late hours of day the paragliders are difficult to see,
that's why we should take care more for our safety and be visible for other members
of air traffic. The answer for it is the innovational Lightweight paramotor strobe light
By SKYFLAR.

The led lamp is composed of 5 led emitters with total power of 50W.

The led emitters due to it construction emit a high luminous flux and during the
work they release into the heat from the connector area.

The led emitters are sunk in the resin and it makes the lamp waterproof
and high impact-resistance.

The Design and Structure of the outer wall makes the LED lamp scatter light.

BASIC DATA:

- Output voltage: 12.6V.

- Short circuit protection.

- Overload protection.

- Over-discharge protection.

- Current protection.

- Maximum continuous discharge current: 5-8 A.

- Maximum momentary discharge current: 10 A.

- Work temperature: - 40°C ---- + 50°C.

- Weight with storage batteries: 260 g.

- Measurements ( length/width/height ): 11,5cm/8cm/3.5cm.

THE SET INCLUDES:

1. A three-battery protective frame.

2. A case for the protective frame.

3. A Velcro to mount the case.

4. A Li-ion charger 12.6V 1A with a LED. **

5. 3 x LG INR18650 MH1 3,2Ah.

6. Operating manual.

Supported LI-ION 18650 Cells:

SANYO NCR18650GA 3450mAh , LG INR18650 MH1 3200mah ,PANASONIC NCR18650PF 2900mAh, SONY US18650V3 2250mAh , SAMSUNG ICR 18650 22P 2150mah.

** (We request that you to provide information about the plug: EU, US, UK; otherwise we will send it according to the country of order) **

PRODUCT PROTECTED BY PATENT LAW:
Construction emit a high luminous flux and during the work they release into the heat from the connector area.
The led emitters are sunk in the resin and it makes the lamp waterproof and high impact-resistant.
The structure of the outer wall makes the led lamp scatter light.

Attention:
The Supplied Strobe Mounting Bracket is designed for circular Tubing, If your Paramotor has an Aerofoil shape cage section then
you may need to make your own bracket or modify the supplied one to fit your frame.

Product awarded by Science and Technology Park in Poland for innovation .
Please Note:
SKYFLAR Nor UKPPG Will Be Liable For ANY Incorrect Wiring Configurations, Nor ANY Consequences as a Direct or
Indirect Result of The Wiring Being Installed / Tested Incorrectly.
(If You Are In Any Doubt of The Correct Way To Test or Install This Electrical Device Then Seek A Professional Electrician
To Advise You As Miss Wiring Can Cause Damage To The SKYFLAR Equipment and / or Your Paramotor Wiring System).

Write A Review