Fly safe ! Every year ,there are more and more paragliders and other ultralight aircraft in the air. During the flight on the late hours of day the paragliders are difficult to see ,thats why we should take care more for our safety and be visible for other members of air traffic. The answer for it is innovational paramotor strobe light SKYFLAR.
Please Note:
We Offer the Option To Have Your Nivana Plug (Optional Purchase Above), Fitted To the Lead For You But We Must Know The CORRECT Configuration of Your Specific Wiring on Your Nirvana Paramotor.
For This Option To Be Completed Correctly, You MUST Stipulate Which Way Round You Require The Positive (+) and Negative (-) Pin Positions Relating To The Socket on your Paramotor.
(To Make Sure That Your Information is Clearly Understood, AFTER You Have Completed Checkout, Take A Picture of Your Socket Installed on Your Nirvana Paramotor and Indicate on the Picture Which is Your Positive and Negative Pins, Then Email The Picture To [email protected])
We Also Need To Know The Length of the Cable From The Controller to the Plug if You Require It To Be Shortened, If NO Length of Cable is Stipulated at Order Then We Will Install The Plug on the Full Length of Standard Wire Supplied in the SKYFLAR Kit.
Please Note: SKYFLAR Nor UKPPG Will Be Liable For ANY Incorrect Wiring Configurations, Nor ANY Consequences as a Direct or Indirect Result of The Wiring Being Installed / Tested Incorrectly.
(If You Are In Any Doubt of The Correct Way To Test or Instal This Electrical Device Then Seek A Professional Electrician To Advise You As Mis Wiring Can Cause Damage To The SKYFLAR Equipment and / or Your Paramotor Wiring System).
The led lamp is composed of 5 led emitters with total power of 50W.
The led emitters due to it construction emit a high luminous flux and during the work they release into the heat from the connector area.
The led emitters are sunk in the resin and it makes the lamp waterproof and high impact-resistant.
The structure of the outer wall makes the led lamp scatter light.
TECHNICAL SPECIFICATIONS :
- Power 17V DC
- 50W peak
- Color temperature 6500K
- Luminous flux 5000 lm
- Visible at dusk up to 8km (5 miles) !!!
- The diameter of the led lamp is only 40 mm (1.57 inch), weight 100 grams.
- Weight set : 215 grams.(7.6 oz.)
- The led lamp does not interfere with radio waves.
The led lamp works with driver :ST-102.
Driver: ST-102
One work Mode
Power: 17V DC
The flash frequency: the single flashes 43 per minute
Dimension: 50x50x27 mm (1.96x1.96x1.06 inch)
Composition of a set
- led lamp
- driver ST-102
- wires with waterproof connectors
- Mount (Mounting Bracket May Need To Be Modified For Aerofoil Shaped Cages)
- clamps 10 pieces
- velcro tape.
- manual
Attention:
When buying please choose the length of wire for the led lamp (to install the hermetic connection).
If we do not get the information , we will send the lamp with wire of 120 cm length ,with the waterproof connector to install by yourself . The max length of wire is 120 cm (47.24 inch).
PRODUCT PROTECTED BY PATENT LAW
construction emit a high luminous flux and during the work they release into the heat from the connector area.
The led emitters are sunk in the resin and it makes the lamp waterproof and high impact-resistant.
The structure of the outer wall makes the led lamp scatter light.
TECHNICAL SPECIFICATIONS:
- Power 17V DC
- 50W peak
- Color temperature 6500K
- Luminous flux 5000 lm
- Visible at dusk up to 8km (5 miles) !!!
- The diameter of the led lamp is only 40 mm (1.57 inch), weight 100 grams.
- Weight set : 215 grams.(7.6 oz.)
- The led lamp does not interfere with radio waves.
The led lamp works with driver: ST-102.
Drive ST-102
One work Mode
Power 17V DC
The flash frequency: the single flashes 43 per minute
Dimension: 50x50x27 mm (1.96x1.96x1.06 inch)
Composition of a set:
- led lamp
- driver ST-102
- wires with waterproof connectors
- handle(mounting bracket)
- clamps 10 pieces
- velcro tape.
- manual
Attention:
The Supplied Strobe Mounting Bracket is designed for circular Tubing, If your Paramotor has an Aerofoil shape cage section then you may need to make your own bracket or modify the supplied one to fit your frame.
