Expert Help & Advice
CAA Registered Aerodrome
Established 2007
SKYFLAR LED STROBE LIGHT 12V - Single Head
Item Code: ST-101RED
WHITE LED Strobe Head
RED LED Strobe Head
£149.00
£149.75 save:£0.75 ✔
Earn 149 points when you buy this item.
WHITE GLOBE CURRENTLY OUT OF STOCK, 1x RED GLOBE AVAILABLE
Fly safe !  

Every year ,there are more and more paragliders and other ultralight aircraft in the air . During the flight on the late hours of day the paragliders are difficult to see ,thats why we should take care more  for our safety and be visible for other members of air traffic. The answer for it is innovational paramotor strobe light SKYFLAR.

The led lamp is composed of 5 led emitters with total power of  50W.
The led emitters due to it construction emit a high luminous flux and during the work they  release  into the heat from the connector area.
The led emitters are sunk in the resin and it makes the lamp waterproof and high impact-resistant.
The structure of the outer wall makes the led lamp scatter light.

TECHNICAL SPECIFICATIONS :

  1. Power  12V DC                                                                                                                  
  2. 50W peak 
  3. Color temperature 6500K
  4. Luminous flux 5000 lm
  5. Visible at dusk up to 8km (5 miles) !!!
  6. The diameter of the led lamp is only 40 mm (1.57 inch), weight 100 grams.
  7. Weight set : 215 grams.(7.6 oz.)
  8. The led lamp does not interfere with radio waves.

The led lamp works with driver: ST-101.
Drive ST-101
One work  Mode 
Power  12V DC 
The flash frequency: the single flashes  43 per minute
Dimension: 50x50x27 mm (1.96x1.96x1.06 inch)

Composition of a set

  • led lamp 
  • driver ST-101
  • wires with waterproof connectors
  • handle(mounting bracket)
  • clamps 10 pieces 
  • velcro tape.
  • manual

Attention:
When buying please choose the length of wire for the led lamp (to install the hermetic connection).
If we do not get the information , we will send the lamp with wire of 120 cm length ,with  the waterproof  connector to install by yourself . The max length of wire is 120 cm (47.24 inch).

PRODUCT PROTECTED BY PATENT LAW
Construction emit a high luminous flux and during the work they release into the heat from the connector area.
The led emitters are sunk in the resin and it makes the lamp waterproof and high impact-resistant.
The structure of the outer wall makes the led lamp scatter light.

Attention:
The Supplied Strobe Mounting Bracket is designed for circular Tubing, If your Paramotor has an Aerofoil shape cage section then you may need to make your own bracket or modify the supplied one to fit your frame.

BASIC DATA:

  • Supply voltage 10,5V 14,5V DC
    (Only Connect Via the Controller NOT Directly Into The LED Lense)
  • Power: 50 W flash.
  • Luminous flux 5000 lumens.
  • Color temperature 5500-6000 K.
  • Does not interfere with radio waves.
  • Resilient to shocks, impacts, water.
  • Led Lamp : diameter 40 mm ( 1,57 inch ), weight 100 grams.
  • Led controller : measurements: 20mm x 20mm x 115mm ( 0,8×0,8×2 inch. ), weight: 100 grams.
  • Range of about 8 km in the dark !!!

One working function: : Single flashes with a frequency of 43 flashes per minute.

ADDITIONALLY

  • Illuminated LED button on the switch that signalizes the device is turned on.

Our lamps are flooded with special polyurethane resin resistant to extreme temperatures (-40 °C to 140 °C), have excellent mechanical resistance and are UV resistant!

PRODUCT PROTECTED BY PATENT LAW.

WHITE GLOBE CURRENTLY OUT OF STOCK, 1x RED GLOBE AVAILABLE
Fly safe !  

Every year ,there are more and more paragliders and other ultralight aircraft in the air . During the flight on the late hours of day the paragliders are difficult to see ,thats why we should take care more  for our safety and be visible for other members of air traffic. The answer for it is innovational paramotor strobe light SKYFLAR.

The led lamp is composed of 5 led emitters with total power of  50W.
The led emitters due to it construction emit a high luminous flux and during the work they  release  into the heat from the connector area.
The led emitters are sunk in the resin and it makes the lamp waterproof and high impact-resistant.
The structure of the outer wall makes the led lamp scatter light.

TECHNICAL SPECIFICATIONS :

  1. Power  12V DC                                                                                                                  
  2. 50W peak 
  3. Color temperature 6500K
  4. Luminous flux 5000 lm
  5. Visible at dusk up to 8km (5 miles) !!!
  6. The diameter of the led lamp is only 40 mm (1.57 inch), weight 100 grams.
  7. Weight set : 215 grams.(7.6 oz.)
  8. The led lamp does not interfere with radio waves.

The led lamp works with driver: ST-101.
Drive ST-101
One work  Mode 
Power  12V DC 
The flash frequency: the single flashes  43 per minute
Dimension: 50x50x27 mm (1.96x1.96x1.06 inch)

Composition of a set

  • led lamp 
  • driver ST-101
  • wires with waterproof connectors
  • handle(mounting bracket)
  • clamps 10 pieces 
  • velcro tape.
  • manual

Attention:
When buying please choose the length of wire for the led lamp (to install the hermetic connection).
If we do not get the information , we will send the lamp with wire of 120 cm length ,with  the waterproof  connector to install by yourself . The max length of wire is 120 cm (47.24 inch).

PRODUCT PROTECTED BY PATENT LAW
Construction emit a high luminous flux and during the work they release into the heat from the connector area.
The led emitters are sunk in the resin and it makes the lamp waterproof and high impact-resistant.
The structure of the outer wall makes the led lamp scatter light.

Attention:
The Supplied Strobe Mounting Bracket is designed for circular Tubing, If your Paramotor has an Aerofoil shape cage section then you may need to make your own bracket or modify the supplied one to fit your frame.

BASIC DATA:

  • Supply voltage 10,5V 14,5V DC
    (Only Connect Via the Controller NOT Directly Into The LED Lense)
  • Power: 50 W flash.
  • Luminous flux 5000 lumens.
  • Color temperature 5500-6000 K.
  • Does not interfere with radio waves.
  • Resilient to shocks, impacts, water.
  • Led Lamp : diameter 40 mm ( 1,57 inch ), weight 100 grams.
  • Led controller : measurements: 20mm x 20mm x 115mm ( 0,8×0,8×2 inch. ), weight: 100 grams.
  • Range of about 8 km in the dark !!!

One working function: : Single flashes with a frequency of 43 flashes per minute.

ADDITIONALLY

  • Illuminated LED button on the switch that signalizes the device is turned on.

Our lamps are flooded with special polyurethane resin resistant to extreme temperatures (-40 °C to 140 °C), have excellent mechanical resistance and are UV resistant!

PRODUCT PROTECTED BY PATENT LAW.

Customer Reviews (0)