Expert Help & Advice
CAA Registered Aerodrome
Established 2007
Sky Paragliders Atis 3
‏
Item Code: Atis 3
15 characters remaining on your input limit
15 characters remaining on your input limit
15 characters remaining on your input limit
£2,695.00
Earn 2695 points when you buy this item.

The ATIS 3 is new high end EN B (LTF 12) category glider. The performance is suited for regular pilots who enjoy speed (up to 52 km/h) and the glide ratio (almost 9) and the sporty spirit of these performance factors.

Even though the majority of manoeuvres are rated A (safety-wise), the performance of the ATIS 3 is far beyond the safety level described by the certification manoeuvres. Occasional pilots and novice pilots might also enjoy and benefit most from ANAKIS, which is graded as an entry EN B level glider.

ATIS 3 is also suitable for MPG and PG flying and this glider can be delivered with risers with or without trimmers.
Pilotswill enjoy very easy take off, safety in flight and performance that isvery surprising, taking into account the passive safety of the glider.

The main distinctive features are:

  • High stability
  • Speed and ability to penetrate headwinds
  • Low weight (4,9 kg in M size)
  • Comfortable SKY handling
  • Thermalling prowess
  • Predictable and easily controlled reactions during SIV manoeuvres (Simulation dIncident en Vol)
  • Performance index (glide/aspect ratio) at the level 1,69 (!)
  • Trailing edge with velcro opening for easy cleaning of the canopy
  • State of the art manufacturing and high quality

Each glider is delivered with:

  • free Porter bag
  • free T-shirt SKYTEAM



Colour scheme


colors_atis3.jpg



Technical info


Atis 3 S M L XL
Layout surface(m2) 22,88 24,70 26,33 28,43
Layout span(m) 10,91 11,33 11,70 12,16
Layout aspect ratio 5,2 5,2 5,2 5,2
Projected surface(m2) 20,32 21,94 23,39 25,25
Projected span (m) 9,04 9,40 9.70 10,08
Projected aspect ratio 4,02 4,02 4,02 4,02
Number of cells 53 53 53 53
Weight of the glider(kg) 4,70 5,10 5,30 5,75
Take-off weight(kg) 60-80 73-95 87-112 102-130
Trim speed(km/h) 37-38 37-38 37-38 37-38
Min. speed(km/h) 23 23 23 23
Max.speed (km/h) 50 51 51 52
Maximim gliding ratio >8,8 >8,8 >8,8 >8,8
Min. sink rate(m/s) <1,15 <1,15 <1,15 <1,15
Test EN B EN B EN B EN B
LTF test LTF 1-2 LTF 1-2 LTF 1-2 LTF 1-2


Own colours

Customise the colours of your SKY glider

To design your own glider, use the tool below. When you have decided on your own unique colour scheme COPY the name of glider and colours picked (for example: Fides 2: Gold / Red Dragon / Deep Blue) into your order. ANY colour combination is available.

Gliders with personalised colours are available only at extra cost. The delivery time depends on the load of the workshop and may vary depending.

Enjoy the look of your unique SKY glider!

TOP

T1 white gold orange red-dragon deep-blue green grey black

S-part white gold orange red-dragon deep-blue green grey black

Stroke white gold orange red-dragon deep-blue green grey black

1. green 2. gold 3. red-dragon

PICKED COLORS: green / gold / red-dragon

BOTTOM

B1 white gold orange red-dragon deep-blue green grey black

S-part white gold orange red-dragon deep-blue green grey black

Stroke white gold orange red-dragon deep-blue green grey black

1. green 2. gold 3. red-dragon

PICKED COLORS: green / gold / red-dragon

ATIS-3

Materials

Canopy

The canopy is made out of the material DOKDO produced by South Korean textile factory Dominico Textiles. To reach the high quality and increase the durability of the canopy, we combine several material and coatings.
The upper panel are made of DOKDO-N20 DMF (WR), 36 grams per square meter.
Profiles are made of DOKDO-N30 DFM and the panels for the leading edge are made ofDOKDO-N20 DMF (WR), 38 grams per square meter.
Download the original  technical data sheets.

The material is made of Nylon 6.6 fibres (PA fibres) produced by Du Pont. The weaving pattern is the so called RipStop structure.

Line scheme

The lines on the ATIS 3 are of the highest quality and are supplied by the German firm EDELRID and LIROS. These lines have high resistance from mechanical abrasion as well as a high degree of length stability.

For the upper cascade we used ELDERID 7850080 lines. These lines are one millimetre in diameter; the core is manufactured out of dyneema and the outer sheath from polyester. The lower lines are manufactured out of PPSL 160 a 200 (Liros) and main brake line are from EDELRID 7850240..

Risers

The risers are made from 20 mm wide webbing, it is manufactured by our supplier MOUKA TINOV. The suspension lines are connected to the risers by means of quick links (maillons) from the French supplier Maillon Rapide.



Download
ATIS 3 manualDownload
in English
ATIS 3 certification EN Download
certification documents EN
ATIS 3 certification LTF Download
certification documents LTF
ATIS 3 manualDownload
in German
ATIS 3 manualDownload
in Czech
Technical data sheets - DOKDODownload
ATIS 3 - reviewDownload
from magazine Parapente Vuelo Libre, N.79/2010, Spanish original
ATIS 3 - reviewDownload
from magazine Parapente Vuelo Libre, No. 79/2010, English translation

The ATIS 3 is new high end EN B (LTF 12) category glider. The performance is suited for regular pilots who enjoy speed (up to 52 km/h) and the glide ratio (almost 9) and the sporty spirit of these performance factors.

Even though the majority of manoeuvres are rated A (safety-wise), the performance of the ATIS 3 is far beyond the safety level described by the certification manoeuvres. Occasional pilots and novice pilots might also enjoy and benefit most from ANAKIS, which is graded as an entry EN B level glider.

ATIS 3 is also suitable for MPG and PG flying and this glider can be delivered with risers with or without trimmers.
Pilotswill enjoy very easy take off, safety in flight and performance that isvery surprising, taking into account the passive safety of the glider.

The main distinctive features are:

  • High stability
  • Speed and ability to penetrate headwinds
  • Low weight (4,9 kg in M size)
  • Comfortable SKY handling
  • Thermalling prowess
  • Predictable and easily controlled reactions during SIV manoeuvres (Simulation dIncident en Vol)
  • Performance index (glide/aspect ratio) at the level 1,69 (!)
  • Trailing edge with velcro opening for easy cleaning of the canopy
  • State of the art manufacturing and high quality

Each glider is delivered with:

  • free Porter bag
  • free T-shirt SKYTEAM



Colour scheme


colors_atis3.jpg



Technical info


Atis 3 S M L XL
Layout surface(m2) 22,88 24,70 26,33 28,43
Layout span(m) 10,91 11,33 11,70 12,16
Layout aspect ratio 5,2 5,2 5,2 5,2
Projected surface(m2) 20,32 21,94 23,39 25,25
Projected span (m) 9,04 9,40 9.70 10,08
Projected aspect ratio 4,02 4,02 4,02 4,02
Number of cells 53 53 53 53
Weight of the glider(kg) 4,70 5,10 5,30 5,75
Take-off weight(kg) 60-80 73-95 87-112 102-130
Trim speed(km/h) 37-38 37-38 37-38 37-38
Min. speed(km/h) 23 23 23 23
Max.speed (km/h) 50 51 51 52
Maximim gliding ratio >8,8 >8,8 >8,8 >8,8
Min. sink rate(m/s) <1,15 <1,15 <1,15 <1,15
Test EN B EN B EN B EN B
LTF test LTF 1-2 LTF 1-2 LTF 1-2 LTF 1-2


Own colours

Customise the colours of your SKY glider

To design your own glider, use the tool below. When you have decided on your own unique colour scheme COPY the name of glider and colours picked (for example: Fides 2: Gold / Red Dragon / Deep Blue) into your order. ANY colour combination is available.

Gliders with personalised colours are available only at extra cost. The delivery time depends on the load of the workshop and may vary depending.

Enjoy the look of your unique SKY glider!

TOP

T1 white gold orange red-dragon deep-blue green grey black

S-part white gold orange red-dragon deep-blue green grey black

Stroke white gold orange red-dragon deep-blue green grey black

1. green 2. gold 3. red-dragon

PICKED COLORS: green / gold / red-dragon

BOTTOM

B1 white gold orange red-dragon deep-blue green grey black

S-part white gold orange red-dragon deep-blue green grey black

Stroke white gold orange red-dragon deep-blue green grey black

1. green 2. gold 3. red-dragon

PICKED COLORS: green / gold / red-dragon

ATIS-3

Materials

Canopy

The canopy is made out of the material DOKDO produced by South Korean textile factory Dominico Textiles. To reach the high quality and increase the durability of the canopy, we combine several material and coatings.
The upper panel are made of DOKDO-N20 DMF (WR), 36 grams per square meter.
Profiles are made of DOKDO-N30 DFM and the panels for the leading edge are made ofDOKDO-N20 DMF (WR), 38 grams per square meter.
Download the original  technical data sheets.

The material is made of Nylon 6.6 fibres (PA fibres) produced by Du Pont. The weaving pattern is the so called RipStop structure.

Line scheme

The lines on the ATIS 3 are of the highest quality and are supplied by the German firm EDELRID and LIROS. These lines have high resistance from mechanical abrasion as well as a high degree of length stability.

For the upper cascade we used ELDERID 7850080 lines. These lines are one millimetre in diameter; the core is manufactured out of dyneema and the outer sheath from polyester. The lower lines are manufactured out of PPSL 160 a 200 (Liros) and main brake line are from EDELRID 7850240..

Risers

The risers are made from 20 mm wide webbing, it is manufactured by our supplier MOUKA TINOV. The suspension lines are connected to the risers by means of quick links (maillons) from the French supplier Maillon Rapide.



Download
ATIS 3 manualDownload
in English
ATIS 3 certification EN Download
certification documents EN
ATIS 3 certification LTF Download
certification documents LTF
ATIS 3 manualDownload
in German
ATIS 3 manualDownload
in Czech
Technical data sheets - DOKDODownload
ATIS 3 - reviewDownload
from magazine Parapente Vuelo Libre, N.79/2010, Spanish original
ATIS 3 - reviewDownload
from magazine Parapente Vuelo Libre, No. 79/2010, English translation
Customer Reviews (0)