FUN 42 MKII successfully completed certification test flight for EN B Tandem rating with closed and open trimmers.
Flight test report - Trimmers closed, Click here
Flight test report - Trimmers opened, Click here
Load test, Click here
Size | Certification Type |
FUN FOR TWO (42) | EN. B |
FUN 42 is dressed in 4 all new, innovative color designs, following the latest trend in APCO.
On some of the wings the bottom surface produced from non-siliconised cloth to allow for advertising and logo application.
The wing uses the same cloth and lines with structure and design same as the Fun 42, so as to guarantee its integrity for entire expanded lifespan of the wing. Nevertheless we were able to reduce the weight of the wing by almost a half kilo thanks to advanced solutions applied. APCO is traditionally known for using materials and building techniques which offer double and triple lifespan over the expected (particularly important to professional tandem pilots)
The glider is made from tear resistant Ripstop Nylon cloth, which is P.U. coated to zero porosity and then siliconized to give the fabric high resistance to the elements. Different cloth is used for the top, bottom and ribs due to their different functions. The lines are made of superaramid covered with a polyester sheath for protection against UV, wear and abrasion. The bottom section of the brake lines is made of Dyneema because of its better mechanical properties. The Carabiners that attach the lines to the risers are made of stainless steel.
Fabric | |
Sail Cloth | 42 gr/m2 "Zero Porosity" Ripstop Nylon |
Rib Reinforcement | 180 g/m2 Mylar (Trilam) |
Warranty | 3 years / 250 Hours |
| Material | Diameter [mm] | Strength [kg] |
Top Floor | Dyneema | 1.0mm | 90kg x 2 |
St Top | Superaramide | 1.2 | 120 |
Middle A1,3, B1,3 | Superaramide | 1.8 | 230 |
Middle A5, B5, C, D, St | Superaramide | 1.5 | 150 |
Lower A;B | Superaramide | 1.9 | 320 |
Lower C;D | Superaramide | 1.8 | 230 |
Brake Cascades: | |
Upper | Dyneema | 1.1 | 95 |
Lower | Dyneema | 2.3 | 230 |