Expert Help & Advice
CAA Registered Aerodrome
Established 2007
SKYFLAR Li-Ion Battery Power Pack Kit 12.6V For Paramotor PPG LED Strobe - NO BATTERIES INCLUDED
‏
CURRENTLY OUT OF STOCK
Fly safe !
Every year ,there are more and more paragliders and other ultralight aircraft in the air . During the flight on the late hours of day the paragliders are difficult to see, that's why we should take care more  for our safety and be visible for other members of air traffic. The answer for it is innovational paramotor strobe light SKYFLAR.

LI-ION POWER PACK KIT ( NO BATTERIES INCLUDED
1x Li-Ion Power Pack Kit 12.6 Volt
Requires: 3x LG INR18650 MH1 3.2AH Batteries or Similar (See Below)
(This Kit Only Contains: The Battery Frame, Outer Case & Charger)

For Use With Single or Duel or Triple Head, 12 Volt, Self Contained,
SKYFLAR High Powered LED Strobe Light or NEW Multi-Function LED Strobe Light System (LED Strobe Lights Available in our Other Listings)
(Please Note: This Kit Contains NO Batteries, Just The Battery Frame, Outer Case & Charger)

LI-ION POWER PACK KIT SKYFLAR


BASIC DATA:

- Output voltage: 12.6V.

- Short circuit protection.

- Overload protection.

- Over-discharge protection.

- Current protection.

- Maximum continuous discharge current: 5-8 A.

- Maximum momentary discharge current: 10 A.

- Work temperature: - 40°C ---- + 50°C.

- Weight with storage batteries: 260 g.

- Measurements ( length/width/height ): 11,5cm/8cm/3.5cm.

THE SET INCLUDES:

1. A three-battery protective frame.

2. A case for the protective frame.

3. A Hook & Loop strap to mount the case.

4. A Li-ion charger 12.6V 1A with a LED. **

5. Operating manual.
 

Supported LI-ION 18650 Cells Required For This Kit:

SANYO NCR18650GA 3450mAh , LG INR18650 MH1 3200mah ,PANASONIC NCR18650PF 2900mAh, SONY US18650V3 2250mAh , SAMSUNG ICR 18650 22P 2150mah.

** (We request that you to provide information about the plug: EU, US, UK; otherwise we will send it according to the country of order) **

PRODUCT PROTECTED BY PATENT LAW:
Construction emit a high luminous flux and during the work they release into the heat from the connector area.
The led emitters are sunk in the resin and it makes the lamp waterproof and high impact-resistant.
The structure of the outer wall makes the led lamp scatter light.

Attention:
The Supplied Strobe Mounting Bracket is designed for circular Tubing, If your Paramotor has an Aerofoil shape cage section then
you may need to make your own bracket or modify the supplied one to fit your frame.

Product awarded by Science and Technology Park in Poland for innovation .
Please Note:
SKYFLAR Nor UKPPG Will Be Liable For ANY Incorrect Wiring Configurations, Nor ANY Consequences as a Direct or
Indirect Result of The Wiring Being Installed / Tested Incorrectly.
(If You Are In Any Doubt of The Correct Way To Test or Install This Electrical Device Then Seek A Professional Electrician
To Advise You As Miss Wiring Can Cause Damage To The SKYFLAR Equipment and / or Your Paramotor Wiring System).
CURRENTLY OUT OF STOCK
Fly safe !
Every year ,there are more and more paragliders and other ultralight aircraft in the air . During the flight on the late hours of day the paragliders are difficult to see, that's why we should take care more  for our safety and be visible for other members of air traffic. The answer for it is innovational paramotor strobe light SKYFLAR.

LI-ION POWER PACK KIT ( NO BATTERIES INCLUDED
1x Li-Ion Power Pack Kit 12.6 Volt
Requires: 3x LG INR18650 MH1 3.2AH Batteries or Similar (See Below)
(This Kit Only Contains: The Battery Frame, Outer Case & Charger)

For Use With Single or Duel or Triple Head, 12 Volt, Self Contained,
SKYFLAR High Powered LED Strobe Light or NEW Multi-Function LED Strobe Light System (LED Strobe Lights Available in our Other Listings)
(Please Note: This Kit Contains NO Batteries, Just The Battery Frame, Outer Case & Charger)

LI-ION POWER PACK KIT SKYFLAR


BASIC DATA:

- Output voltage: 12.6V.

- Short circuit protection.

- Overload protection.

- Over-discharge protection.

- Current protection.

- Maximum continuous discharge current: 5-8 A.

- Maximum momentary discharge current: 10 A.

- Work temperature: - 40°C ---- + 50°C.

- Weight with storage batteries: 260 g.

- Measurements ( length/width/height ): 11,5cm/8cm/3.5cm.

THE SET INCLUDES:

1. A three-battery protective frame.

2. A case for the protective frame.

3. A Hook & Loop strap to mount the case.

4. A Li-ion charger 12.6V 1A with a LED. **

5. Operating manual.
 

Supported LI-ION 18650 Cells Required For This Kit:

SANYO NCR18650GA 3450mAh , LG INR18650 MH1 3200mah ,PANASONIC NCR18650PF 2900mAh, SONY US18650V3 2250mAh , SAMSUNG ICR 18650 22P 2150mah.

** (We request that you to provide information about the plug: EU, US, UK; otherwise we will send it according to the country of order) **

PRODUCT PROTECTED BY PATENT LAW:
Construction emit a high luminous flux and during the work they release into the heat from the connector area.
The led emitters are sunk in the resin and it makes the lamp waterproof and high impact-resistant.
The structure of the outer wall makes the led lamp scatter light.

Attention:
The Supplied Strobe Mounting Bracket is designed for circular Tubing, If your Paramotor has an Aerofoil shape cage section then
you may need to make your own bracket or modify the supplied one to fit your frame.

Product awarded by Science and Technology Park in Poland for innovation .
Please Note:
SKYFLAR Nor UKPPG Will Be Liable For ANY Incorrect Wiring Configurations, Nor ANY Consequences as a Direct or
Indirect Result of The Wiring Being Installed / Tested Incorrectly.
(If You Are In Any Doubt of The Correct Way To Test or Install This Electrical Device Then Seek A Professional Electrician
To Advise You As Miss Wiring Can Cause Damage To The SKYFLAR Equipment and / or Your Paramotor Wiring System).
Customer Reviews (0)